12/28-1/5は発送業務をお休みいたします

GYMMAT  |  SKU: ILT500-10-BL

Interlocking Tile 50cm x 50cm x 10mm

¥1,540 ¥2,750 (tax included)
Color

About shipping and delivery

Once your order is confirmed, we will usually ship the item within 1-2 business days. (Shipping operations are closed on Saturdays, Sundays, and holidays)
*For products that are out of stock, you will have to wait approximately one month from the time you place your order.

Normally home delivery will be by Sagawa Express.
*You can specify the date and time, so if you wish, please enter your desired delivery date and time in the notes section of the checkout page.

about shipping cost

Shipping charges (tax included) are as follows.

Honshu, Shikoku, Hokkaido, Kyushu area
Free shipping is available for orders totaling 10,000 yen or more (tax included).

Okinawa and remote island areas Shipping charges will be estimated on a case-by-case basis.

*If the load exceeds the normal delivery capacity, it will be delivered by chartered flight and additional charges may apply.
*Shipping charges for chartered flights will be estimated each time.

Description

This is a 10mm thick gym joint mat provided by GYMMAT. This product is made by processing a gym roll mat into a joint type, and the size is 50cm square and the thickness is 10mm. *The width of the overlapping part at the joint is 16mm, so when connected, it will be 98.4cm from end to end.

It is relatively lightweight yet highly hard, making it ideal for protecting floors when installing strength and cardio equipment. In addition, this mat is recommended for situations where you do not want to apply strong impact to the floor, such as when exercising with your own body weight at a home gym.

On the other hand, it does not have the vibration-proofing and shock-absorbing properties of a rubber chip mat, so if you anticipate dropping dumbbells or barbells, we recommend a gym rubber mat .

The mat has a non-slip finish, so it has an excellent grip and is effective when exercising on machines. Also, since it is a joint type, there will be no gaps between the mats when exercising.

In addition, our rubber chip mat products have passed tests for PAH (polycyclic aromatic hydrocarbons), SVHC (substances of very high concern), formaldehyde, etc., so you can use them with confidence at home or in a commercial gym. . Because we are particular about the quality of the recycled rubber that is the raw material, the rubber odor is suppressed compared to other rubber mats on the market.

Since the mat is a joint type, it can be installed by simply joining the tiles together, and basically no adhesive is required. You can also adjust the size with a cutter, so you can lay it out to fit the size of your room.

The 50cm square is a size and weight that is easy for individuals to handle, so it is often used in relatively small spaces such as home gyms and personal gyms. It is also useful for partially laying mats under the machines in medium to large commercial gyms.

If you are building a home gym for the first time or opening a commercial gym and are having trouble choosing a mat, please refer to this article.

How to choose a mat for your home gym


Major features

  • Rubber mat with excellent wear resistance and durability
  • Easy to install as it is a joint type and does not require adhesive construction.
  • Size can be adjusted with cutter
  • Uses only raw materials with low rubber odor
  • Water resistance, cold resistance, ozone resistance, heat resistance, UV resistance (can be used from -40℃ to 100℃)


Product Specifications

Weight: 2.6kg
Size: 50cm x 50cm x 10mm
Surface hardness: 65
Material: SBR rubber + EPDM rubber Color: Gray, black, blue (other colors can be made to order)
Accessories: None
Tolerance: +-1%
Country of manufacture: China

*Please note that the item will be shipped in simple packaging using air packing.
*The width of the overlapping part at the joint is 16mm, so when connected, it will be 98.4cm from end to end.

GYMMAT

Interlocking Tile 50cm x 50cm x 10mm

¥1,540 ¥2,750 (tax included)

This is a 10mm thick gym joint mat provided by GYMMAT. This product is made by processing a gym roll mat into a joint type, and the size is 50cm square and the thickness is 10mm. *The width of the overlapping part at the joint is 16mm, so when connected, it will be 98.4cm from end to end.

It is relatively lightweight yet highly hard, making it ideal for protecting floors when installing strength and cardio equipment. In addition, this mat is recommended for situations where you do not want to apply strong impact to the floor, such as when exercising with your own body weight at a home gym.

On the other hand, it does not have the vibration-proofing and shock-absorbing properties of a rubber chip mat, so if you anticipate dropping dumbbells or barbells, we recommend a gym rubber mat .

The mat has a non-slip finish, so it has an excellent grip and is effective when exercising on machines. Also, since it is a joint type, there will be no gaps between the mats when exercising.

In addition, our rubber chip mat products have passed tests for PAH (polycyclic aromatic hydrocarbons), SVHC (substances of very high concern), formaldehyde, etc., so you can use them with confidence at home or in a commercial gym. . Because we are particular about the quality of the recycled rubber that is the raw material, the rubber odor is suppressed compared to other rubber mats on the market.

Since the mat is a joint type, it can be installed by simply joining the tiles together, and basically no adhesive is required. You can also adjust the size with a cutter, so you can lay it out to fit the size of your room.

The 50cm square is a size and weight that is easy for individuals to handle, so it is often used in relatively small spaces such as home gyms and personal gyms. It is also useful for partially laying mats under the machines in medium to large commercial gyms.

If you are building a home gym for the first time or opening a commercial gym and are having trouble choosing a mat, please refer to this article.

How to choose a mat for your home gym


Major features


Product Specifications

Weight: 2.6kg
Size: 50cm x 50cm x 10mm
Surface hardness: 65
Material: SBR rubber + EPDM rubber Color: Gray, black, blue (other colors can be made to order)
Accessories: None
Tolerance: +-1%
Country of manufacture: China

*Please note that the item will be shipped in simple packaging using air packing.
*The width of the overlapping part at the joint is 16mm, so when connected, it will be 98.4cm from end to end.

Color

  • Grey
  • Black
  • Blue
View product